METAGUARD 302 MATTE OVERLAMINATE
Product Information
MetaGuard 300 is recommended for Metamark MD3 series. Has a matched overlaminate it prevents tunnling and delamination. MG300 is a 70 micron monomeric calendered matt overlaminate,The 70 micron film gives a high level of abrasion resistance and contains UV stabilisers. It can be used on flat or gently curved surfaces such as vehicle graphics.
Features:
- 70 micron
- Calendered PVC film
- Permanent clear pressure sensitive solvent-based acrylic adhesive with UV inhibitors
- Finishes Available MG-302 Matt, MG-305 Gloss, MG-306 Sandtex
- Matched to Metamark MD3 & MDP Print films
- For use on Solvent, Eco Solvent and Latex prints
- External weathering 5 years (Unprinted)
- Fire Rating Class B - BS EN 13501-1:2018
- REACH and RoHS Compliant
More information in the FAQ tab below.
Starting at
$399.49
Prices exclude GST.
We deliver all over Australia!
Check our FAQ's for lead times.
Talk to an expert. We're on hand to help with any of your questions 8am-5pm,
Monday to Friday.
Call our team on 1300 713 567.
Finishes:
- Finishes Available: MG-302 Matt, MG-305 Gloss, MG-306 Sandtex
Face Film:
- 70 micron
- Calendered PVC
Adhesive:
- Type: Permanent clear pressure sensitive solvent-based acrylic adhesive with UV inhibitors
Release Liner:
- Print: ‘Metamark Digital Vinyl’ Grey print
- Weight: 140 gsm nominal
- Type: Solventless Kraft
Durability:
- External weathering: 5 years (Unprinted)
- Fire Rating: Class B - BS EN 13501-1:2018
- REACH and RoHS Compliant
Handling and Application:
- This product is suitable for cold lamination using a laminator.
- Ensure that the material has reached room temperature and a relative humidity of 50% before printing.
- Do not handle the face film, ensure free from dust and static.
- Allow the inks to cure before overlaminating, this is usually 24-48 hours (darker colours can be longer).
- Suitable for use on Eco Solvent, Solvent and Latex prints.
- The product is matched to MD3 & MDP. Matched laminates prevent tunnelling and delamination.
- Apply around 30°C on the top roller to prevent silvering of the adhesive.
- The user should determine suitability of the overlaminate to the print media.
Continue Shopping
Related Products
METAMARK MD-3 GLOSS WHITE
Starting at
$42.53