METAGUARD 702 MATT CLEAR O/LAM
Product Information
MetaGuard 702 has a matt finish and is a 70 micron polymeric calendered self-adhesive vinyl overlaminate with UV inhibitors, suitable for lamination of interior or exterior applications. Overlaminating with MetaGuard 700 provides increased resistance to abrasion and durability of the print. When applied over Metamark MD5 digital print media the products provide a matched system. It can be applied over flat or semi-curved surfaces and has a solvent-based adhesive that eliminates problems during wet application.
The rule of thumb is the overlaminate must match or excess the life of the media.
Features:
- 70 micron
- Polymeric calendered PVC
- Permanent clear pressure sensitive solvent-based acrylic with UV inhibitors
- Finishes Available MG-702 Matt, MG-703 Satin and MG705 Gloss
- Matched to Metamark MD5 Print films
- For use on Solvent, Eco Solvent and Latex prints
- External weathering 7 years (Unprinted)
- Fire Rating Class B - BS EN 13501-1:2018
- REACH and RoHS Compliant
More information in the FAQ tab below.
We deliver all over Australia!
Check our FAQ's for lead times.
Talk to an expert. We're on hand to help with any of your questions 8am-5pm,
Monday to Friday.
Call our team on 1300 713 567.
Finishes:
- Finishes Available: MG-702 Matt, MG-703 Satin and MG-705 Gloss
Face Film:
- 70 micron
- Polymeric calendered PVC
Adhesive:
- Type: Permanent clear pressure sensitive solvent-based acrylic with UV inhibitors
Release Liner:
- Print: ‘Metamark Digital Vinyl’ Grey print
- Weight: 140 gsm nominal
- Type: Solventless Kraft
Durability:
- External weathering: 7 years (Unprinted)
- Fire Rating: Class B - BS EN 13501-1:2018
- REACH and RoHS Compliant
Handling and Application:
- This product is suitable for cold lamination using a laminator.
- Ensure that the material has reached room temperature and a relative humidity of 50% before printing.
- Do not handle the face film, ensure free from dust and static.
- Allow the inks to cure before overlaminating, this is usually 24-48 hours (darker colours can be longer).
- Suitable for use on Eco Solvent, Solvent and Latex prints.
- The product is matched to MD5. Matched laminates prevent tunnelling and delamination.
- Apply around 30°C on the top roller to prevent silvering of the adhesive.
- The user should determine suitability of the overlaminate to the print media.
Continue Shopping
