METAMARK DIGITAL TRANS
Product Information
Metamark Digital Translucent is an 80 micron polymeric calendered self-adhesive film, with 38% light transmission. Having been designed specifically for backlit panels and light boxes, the Metamark Digital Translucent is a satin finish to produce marginal glare and constant colour when printed Solvent or Eco Solvent printers.
Features:
- White Satin
- 38% light transmission
- 80 micron
- Polymeric calendered vinyl
- Crystal clear solvent-based acrylic adhesive
- For Solvent, Eco Solvent, Latex and UV printing
- External weathering 5 years (Unprinted)
- Fire Rating Class B - BS EN 13501-1:2007
- REACH and RoHS Compliant
- Matched MetaGuard MG-700 Overlaminates
More information in the FAQ tab below.
Starting at
$21.75
Prices exclude GST.
We deliver all over Australia!
Check our FAQ's for lead times.
Talk to an expert. We're on hand to help with any of your questions 8am-5pm,
Monday to Friday.
Call our team on 1300 713 567.
Face Film:
- MDT-600 White Satin
- Face Film Polymeric Calendered Vinyl
- 80 micron
Adhesive:
- Type: Crystal clear solvent-based acrylic
Release Liner:
- Print: ‘Metamark T series’ blue print
- Weight: 140 gsm nominal
- Type: Layflat kraft with PE coating
Material Handling:
- Always perform a test print first. Ensure that the correct profiles and heater settings are used. Refer to www.metamark.co.uk.
- Ensure that the material has reached room temperature and a relative humidity of 50% before printing.
- Do not handle the face film directly and ensure it is free from dust and static.
- Suitable for use on Solvent, Eco Solvent, Latex and UV inkjet printers. Always perform a test print first.
Overlaminating and Application:
- Allow a minimum of 24-48 hours for the solvents to dry off before application of the overlaminate, or to the substrate, depending on the print and drying conditions this can often be in excess of 48 hours. Retained solvents will reduce adhesion levels.
- The matched laminate for MDT is MetaGuard 700 series (703 Satin). For all other laminates the user should determine suitability.
- The user should determine suitability of substrate, refer to the web site. Not recommended for use on low energy surfaces.
- Suitable for wet or dry application
Durability:
- External weathering: 5 years (unprinted - European conditions)
- Fire Rating: Class B. BS EN 13501-1:2007
- REACH and RoHS Compliant