METAMARK MD5 B/O WHITE PACKS

Product Information

Metamark MD5BO is a gloss white blockout digital film. Offering a high level of performance for medium to long term indoor, outdoor and general signage applications. MD5BO has a grey blockout adhesive to increase opacity and can be applied to most flat or simple curved surfaces. Outstanding print performance with Solvent, Eco Solvent, Latex & UV inkjet printers.
Packs include matching overlaminate for extra UV protection. MG702 - Matt, MG703 - Satin, MG705 - Gloss

Features:

  • 70 micron -White Gloss - Blockout
  • Permanent grey solvent-based acrylic adhesive
  • Layflat kraft liner with PE coating
  • Outstanding print performance
  • Applications to flat or slightly curved surfaces
  • Suitable for wet application
  • Up to 5 year durability

More information in the FAQ tab below.

Prices exclude GST.
Grouped product items
Product Name Qty
M/MARK PACK (MD5 B/OUT / MG-702)1370MM
$1,106.19
M/MARK PACK (MD5 B/OUT / MG-705)1370MM
$1,106.19
M/MARK PACK (MD5 B-OUT/MG-705) 1600MM
$1,305.30

We deliver all over Australia! 
Check our FAQ's for lead times.

Customer Service

Talk to an expert. We're on hand to help with any of your questions 8am-5pm,
Monday to Friday.
Call our team on 1300 713 567.

You're enquiring:METAMARK MD5 B/O WHITE PACKS
Please type the letters and numbers below

Adhesive:

  • Permanent grey solvent-based acrylic

Release Liner:

  • Print ‘Metamark Digital Vinyl’ grey print
  • Weight 140 gsm nominal 
  • Type Layflat kraft with PE coating

Printing and Handling:

  • Suitable for use on Solvent, Eco Solvent, Latex and U.V. inkjet printers. Always perform a test print first.
  • Ensure that the correct profiles and heater settings are used. Most profiles are available for download from www.metamark.co.uk.
  • Ensure that the material has reached room temperature and a relative humidity of 50% before printing.
  • Do not handle the face film directly and ensure it is free from dust and static.
Overlaminate:
  • Finish Available: MG-705 Gloss, MG-703 Satin, MG-702 Matt
  • Face Film: Polymeric calendered PVC 
  • Gauge: 70 micron nominal
  • Adhesive Type: Permanent clear pressure sensitive solvent-based acrylic with UV inhibitors
  • Release Liner: Print ‘Metamark Digital Vinyl’ grey print
  • Weight: 140 gsm nominal 
  • Type: Kraft paper with high internal strength and PE coating
  • External weathering: 7 years (European conditions

Overlaminating:

  • Overlamination is recommended to prevent abrasion and to extend colour fastness.
  • Allow the inks to cure before overlaminating, this is usually 24-48 hours.
  • The matched laminate for MD5-B is MetaGuard 700. For all other laminates the user should determine suitability.

Application:

  • Allow the inks to cure before cutting flush to the print, this is usually 24-48 hours.
  • Apply unstressed, in particular to curves and recesses. It is not suitable for application over rivets or complex recesses.
  • Suitable for wet application. Always apply dry into recesses, and where the print is cut flush, to ensure best adhesion.
  • Not recommended for use on low energy surfaces such as polypropylene. The user should determine suitability of substrate

Durability:

  • 7 years - (unprinted - European conditions)