METAMARK METACAST WRAP PACK with MATT O/LAM
Product Information
Metamark MetaCast with MetaGuard Cast Overlaminate, (Gloss or Matt) MetaCast media is also available individually.
2 widths and 3 roll lengths available, the 1600mm wide being a huge advantage. Wider prints means less joins on the vehicle and less wastage.
MetaCast® MDC is a premium 50 micron cast digital film giving wrap professional total confidence that they will get ultimate performance on full vehicle wraps. Featuring the MetaGlide adhesive technology, with next generation micro channel air release system, this gives optimal performance with enhanced repositionability, and high adhesive strength. This gives total confidence when fitting into 3D channels and recesses. MDC also offers improved handling with it's layflat stability and smooth release liner. Outstanding print quality, colour gamut and out of the box printer compatibility, through the range of ICC profiles available.
MetaGuard Cast - MGC is a 40 micron, premium high gloss or matt cast overlaminate, that completes the MetaCast wrap system.
MetaCast Film:
- Gloss white
- 50 Micron
- Premium cast film
- MetaGlide Micro Channel Grey Solvent-Based Adhesive
- Repositionable, layflat stability, and smooth release handling
- Outstanding print quality with high gloss
- For Solvent, Eco Solvent, Latex and UV printing
- External weathering 10 years (Unprinted)
- Fire Rating Self-extinguishing
Metaguard Cast Overlaminate:
- Matt MGC-002
- 40 micron
- Premium cast overlaminate
- High gloss or matt
- Permanent Solvent-Based Adhesive
- 140gsm PE Layflat Liner
- Suitable for Cold Lamination
- External weathering 10 years
- Fire Rating Self‐extinguishing
We deliver all over Australia!
Check our FAQ's for lead times.
Talk to an expert. We're on hand to help with any of your questions 8am-5pm,
Monday to Friday.
Call our team on 1300 713 567.
Adhesive:
- MetaGlide Micro Channel Grey Solvent-Based Adhesive (MDC)
- Permanent Solvent‐Based Adhesive (MGC)
- Print: ‘MetaGlide’ print (MDC)
- Weight: 140 gsm nominal
- Type: Structured micro channel PE layflat (MDC)
- Print: Metamark print (MGC)
- Type: PE layflat (MGC)
Printing and Handling:
- Suitable for use on Solvent, Eco Solvent, Latex and U.V. inkjet printers. Always perform a test print first.
- Ensure that the correct profiles and heater settings are used. Most profiles are available for download from www.metamark.co.uk.
- Ensure that the material has reached room temperature and a relative humidity of 50% before printing.
- Do not handle the face film directly and ensure it is free from dust and static.
- Allow the inks to cure before overlaminating, this is usually 24-48 hours. (Not applicable to HP Latex prints)
- The matched laminate for MDC is MetaGuard MGC.
Application:
- Allow a minimum of 24-48 hours for the solvents to dry off before application of the overlaminate, or to the vehicle, depending on the print and drying conditions this can often be in excess of 48 hours. Retained solvents will reduce adhesion levels
- Successful vehicle wrap application requires the necessary techniques. Refer to www.metamark.co.uk for application guidelines.
- The product is designed to be used with a dry application, apply 55-65°C heat to soften the film and allow conformability and after application superheat the film into recesses at 90-95°C. Do not overstretch as this will cause the application to fail.
- The user should determine suitability of substrate
Overlaminating:
- The matched laminate for MDC is MetaGuard MGC.
- Overlamination is recommended to prevent abrasion and to extend colour fastness.
- Allow a minimum of 24-48 hours for the solvents to dry off before application of the overlaminate
Durability:
- External weathering 10 years (Unprinted)
- Fire Rating Self-extinguishing.
Continue Shopping
Related Products
Starting at $1,179.78
