METAMARK METAGUARD DECOR OVERLAMINATE
Product Information
The MetaGuard Decor, is a range of textured overlaminates provide a highly durable protection for your Metamark Digital Films. They are scuff resistant for high traffic areas. Having these attractive textured finishes will help hide many imperfections that may be in the wall, along with enhancing the depth of colour to the print, offering excellent dimensional stability.
Features:
- 150 micron textured film
- Polymeric Calendered PVC film
- Permanent clear pressure sensitive solvent-based acrylic adhesive with UV inhibitors
- MG-W-002 SandTex finish
- Matched to Metamark MD5 series
- Durability 7 years
- Fire Rating Class C - BS EN 13501-1:2007
More information in the FAQ tab below.
We deliver all over Australia!
Check our FAQ's for lead times.
Talk to an expert. We're on hand to help with any of your questions 8am-5pm,
Monday to Friday.
Call our team on 1300 713 567.
Face Film:
- 150 micron
- Polymeric Calendered PVC film
Adhesive:
- Permanent clear pressure sensitive solvent-based acrylic with UV inhibitors
Release Liner:
- Print: ‘Metamark Digital Vinyl’ grey print
- Weight: 140 gsm nominal
- Type: Kraft paper with high internal strength and PE coating
Finishes:
- MG-W-002 SandTex
- MG-W-001 Artisan
Durability:
- 7 years
- Fire Rating Class C - BS EN 13501-1:2007
Handling and Application:
- This product is suitable for cold lamination using a laminator.
- Ensure that the material has reached room temperature and a relative humidity of 50% before printing.
- Do not handle the face film, ensure free from dust and static.
- Allow the inks to cure before overlaminating, this is usually 24-48 hours.
- Suitable for use on solvent, eco-solvent and latex prints.
- Apply around 30°C on the top roller to prevent silvering of the adhesive.
- Refer to www.metamark.co.uk for further application guidelines.
- The user should determine suitability of the overlaminate to the print media.