METAMARK METAGUARD MG-i OVERLAMINATE
Product Information
MetaGuard MGi is the matched overlaminate to the Metamark MD-i and MD-i-AB The 70 micron polymeric film, with solvent adhesive, gives a high level of abrasion resistance and contains UV stabilisers. It can be used on flat or simple curves such as vehicle graphics.
Suitable for Solvent, Eco Solvent and Latex inks.
Also available in Gloss white packs and Metascape B/out packs
Features:
- 70 micron
- Calendered PVC
- Available MG-i-002 Matt and MG-i-005 Gloss
- Suitable for cold lamination using a laminator
- External weathering 5 years (Unprinted)
- Fire Rating Class B - BS EN 13501-1:2018
- REACH and RoHS Compliant
More information in the FAQ tab below.
Prices exclude GST.
We deliver all over Australia!
Check our FAQ's for lead times.
Talk to an expert. We're on hand to help with any of your questions 8am-5pm,
Monday to Friday.
Call our team on 1300 713 567.
Finishes:
- Finishes Available: MG-i-002 Matt and MG-i-005 Gloss
Face Film:
- 70 micron
- Calendered PVC
Adhesive:
- Type: Permanent clear pressure sensitive solvent-based acrylic with UV inhibitors
Release Liner:
- Print: ‘Metamark Digital Vinyl’ Grey print
- Weight: 140 gsm nominal
- Type: Solventless Kraft
Durability:
- External weathering: 5 years (Unprinted)
- Fire Rating: Class B - BS EN 13501-1:2018
- REACH and RoHS Compliant
Handling and Application:
- This product is suitable for cold lamination using a laminator.
- Ensure that the material has reached room temperature and a relative humidity of 50% before printing.
- Do not handle the face film, ensure free from dust and static.
- Allow the inks to cure before overlaminating, this is usually 24-48 hours (darker colours can be longer).
- Suitable for use on Eco Solvent, Solvent and Latex prints.
- The product is matched to MDi. Matched laminates prevent tunnelling and delamination.
- Apply around 30°C on the top roller to prevent silvering of the adhesive.
- The user should determine suitability of the overlaminate to the print media.