METAMARK MD5-UB METAGRAB BLOCKOUT
Product Information
Metamark MD5 Series with the MetaGrab® adhesive system offers a very high tack, offering an ideal solution for rough, textured, and difficult to stick to surfaces. Applications include walls and floor décor onto sealed plastered, concrete, or floors. It is also suitable for textured low-energy plastics. MD5-UB is part of the extensive range of MD5 print media benefiting from Metamark’s unique coating technology, providing best-in-class print quality. Metamark MD5-UB is compatible with Solvent, Eco-Solvent, Latex, and UV printers. The 70 micron film has a grey opaque adhesive and is offered in white gloss or matt.
The unprinted film is durable up to 7 years outdoor.
- 70 Micron
- Polymeric Calendered Film
- White Gloss (MD5-UB-100) / White Matt (MD5-UB-101M)
- MetaGrab® Ultra Permanent Grey Solvent-Based Acrylic Tack adhesive.
- For sealed textured, walls, floor, plastics, and difficult to adhere to surfaces.
- Solvent, Eco-Solvent, Latex and UV Compatible.
- Matched laminate is MetaGuard 700.
- Up to 7 years external durability unprinted.(European conditions)
We deliver all over Australia!
Check our FAQ's for lead times.
Talk to an expert. We're on hand to help with any of your questions 8am-5pm,
Monday to Friday.
Call our team on 1300 713 567.
Face Film:
- Face Film Polymeric Calendered Viny
Finishes:
- MD5-UB-100 White Gloss
- MD5-UB-101M White Mat
Adhesive:
- Type Ultra tack permanent grey solvent-based acrylic
Release Liner:
- Print: ‘Metamark Digital Vinyl’ grey print
- Weight: 140 gsm nominal
- Type: Layflat kraft with PE coating
Printing and Handling:
- Always perform a test print first. Ensure that the correct profilesand heater settings are used. Refer to www.metamark.co.uk
- Ensure that the material has reached room temperature and a relative humidity of 50% before printing.
- Do not handle the face film, ensure free from dust and static.
- Overlamination is recommended to prevent abrasion, extends colour fastness, and also offers easier handling.
- The matched laminate for MD5UB is MetaGuard MG-700 Series.
Application:
- Allow a minimum of 24-48 hours for the solvents to dry off before application of the overlaminate, or to the substrate, depending on the print and drying conditions this can often be in excess of 48 hours. Retained solvents will reduce adhesion levels.
- Apply unstressed, in particular to curves and recesses.
- It is not suitable for application over rivets or complex recesses.
- Suitable for wet or dry application.
- The user should determine suitability of substrate.
Durability:
- External weathering 7 years (Unprinted)
- Fire Rating Class B - BS EN 13501-1:2007
- REACH and RoHS Compliant.