Can't make up your mind?

You can now select up to 4 products to do a product comparison. Do a comparison now

Go to product comparison

METAMARK MD5A METASCAPE B/O WHITE PACKS

main product photo

Product Information

Metamark MD5BA is a 70 micron, gloss white blockout digital film with MetaScape technology. Offering faster and easier application by providing air with an exit route from under the graphic, with greater repositioning during application. The grey adhesive is to provide  increased opacity and to provent any colour showing though from the background. achive outstanding print performance when printing with Solvent, Eco Solvent or UV inkjet printers. Can be applied to most flat or simple curved surfaces.
Matching overlaminates MG702 - Matt, MG703 - Satin, MG705 - Gloss
Media also available without overlaminate.

Features:

  • 70 micron - White Gloss - MetaScape Blockout
  • Permanent grey solvent-based acrylic adhesive
  • Outstanding print performance
  • Applications to flat or slightly curved surfaces
  • Dry application only
  • Up to 5 year durability

More information in the FAQ tab below.

Prices exclude GST.
Grouped product items
Product Name Qty
METASCAPE PACK (MD-5A/MG-702) 1370MM
$1,149.41
METASCAPE PACK (MD-5A/MG-702) 1600MM
$1,343.57
METASCAPE PACK (MD-5A/MG-703) 1370MM
$1,149.41
METASCAPE PACK (MD-5A/MG-703) 1600MM
$1,343.57
METASCAPE PACK (MD-5A/MG-705) 1370MM
$1,149.41
METASCAPE PACK (MD-5A/MG-705) 1600MM
$1,343.57
Add to Product Comparison Add to Wishlist

We deliver all over Australia! 
Check our FAQ's for lead times.

Customer Service

Talk to an expert. We're on hand to help with any of your questions 8am-5pm,
Monday to Friday.
Call our team on 1300 713 567.

You're enquiring:METAMARK MD5A METASCAPE B/O WHITE PACKS
Please type the letters and numbers below

Adhesive:

  • ‘MetaScape’ permanent grey solventbased acrylic with air channels.
Face Film:
  • Face Film Polymeric calendered PVC 
  • Gauge 70 micron nominal 
  • Tensile Strength 47N/25mm MD / 43N/25mm TD nom.

Printing and Handling:

  • Suitable for use on Solvent, Eco Solvent, Latex and U.V. inkjet printers. Always perform a test print first. 
  • Ensure that the correct profiles and heater settings are used. Most profiles are available for download from www.metamark.co.uk.
  • Ensure that the material has reached room temperature and a relative humidity of 50% before printing.  Do not handle the face film directly and ensure it is free from dust and static. 
Overlaminate:
  • Finishes Finish Available: MG-705 Gloss, MG-703 Satin, MG-702 Matt
  • Face Film: Polymeric calendered PVC 
  • Gauge: 70 micron nominal
  • Adhesive Type: Permanent clear pressure sensitive solvent-based acrylic with UV inhibitors
  • Release Liner: Print ‘Metamark Digital Vinyl’ grey print
  • Weight: 140 gsm nominal 
  • Type: Kraft paper with high internal strength and PE coating
  • External weathering: 7 years (European conditions)

Application:

  • Allow the inks to cure before cutting flush to the print. This is usually 24-48 hours. (Not applicable to HP Latex prints)
  • Apply unstressed, in particular to curves and recesses. It is not suitable for application over rivets or complex recesses.
  • Suitable for dry application only.
  • Not recommended for use on low energy surfaces such as polypropylene. The user should determine suitability of substrate.

Overlaminating:

  • Overlamination is recommended to prevent abrasion and to extend colour fastness.
  • Allow the inks to cure before overlaminating, this is usually 24-48 hours. (Not applicable to HP Latex prints) 
  • The matched laminate for MD5A-B is MetaGuard 700. For all other laminates the user should determine suitability

Durability:

  • External weathering: 7 years - (unprinted - European conditions)