METAMARK MD-i-G METAGLIDE WHITE GLOSS PACKS
Product Information
New to the range - Metamark MDiG featuring the MetaGlide® air release system, that improves all round handling. With micro structured air release liner, you can lift and reapply MetaGuide graphics with a smooth clean peel that prevents damage to the graphic. With exceptional layflat printability, prints can stay stored or loosely rolled confidently without tunneling or delamination.
Features:
- Gloss white
- 70 micron face film
- Outstanding print performant
- Up to 3yrs outdoor lifespan unprinted
- Matching overlaminate MGi Gloss-005 or Matt-002
- Printable with Solvent, Eco Solvent, UV and Latex Printers
- Media available separately
More information in the FAQ tab below.
Prices exclude GST.
We deliver all over Australia!
Check our FAQ's for lead times.
Talk to an expert. We're on hand to help with any of your questions 8am-5pm,
Monday to Friday.
Call our team on 1300 713 567.
Face Film:
- Face Film: Polymeric Calendered PVC
- Gauge: 70 micron nominal
Adhesive:
- MetaGlide® Air Release Permanent Solvent-Based Adhesive
Release Liner:
- Print: ‘MetaGlide®’ purple print
- Weight: 140 gsm nominal
- Type: Structured layflat kraft paper with PE coating
Printing and Handling:
- Suitable for use on Solvent, Eco Solvent, Latex and U.V. inkjet printers. Always perform a test print first.
- Ensure that the correct profiles and heater settings are used. Most profiles are available for download from www.metamark.co.uk.
- Ensure that the material has reached room temperature and a relative humidity of 50% before printing.
- Do not handle the face film directly and ensure it is free from dust and static.
Overlaminate:
- Suitable for use on Solvent, Eco Solvent inkjet and Latex prints on Metamark print media. Not suitable for UV prints.
- The product is matched to Metamark MD-i Series. The user should determine suitability of the overlaminate to other print media.
- Allow the inks to cure before overlaminating, usually 24-48 hours. Failure to do so can cause delamination, tunnelling and shrinkage.
- Apply around 30°C on the top roller to prevent silvering of the adhesive.
- Face Film: Polymeric Calendered PVC
- Gauge: 70 micron nominal
- Adhesive Type: Permanent solvent-based acrylic with UV inhibitors
- Release Liner Print: ‘Metamark Digital Vinyl’ purple print
- Weight: 140 gsm nominal
- Type: Layflat kraft paper with PE coating
- External weathering: 5 years (unprinted - European conditions)
Overlaminating:
- Overlamination is recommended to prevent abrasion and to extend colour fastness.
- Allow the inks to cure before overlaminating, this is usually 24-48 hours.
- The matched laminate for MDiG is MetaGuard MGi. For all other laminates the user should determine suitability.
Application:
- Allow the inks to cure before cutting flush to the print, this is usually 24-48 hours. Suitable for dry application only.
- Apply to flat surfaces or simple curves. Apply unstressed. Not suitable for application over rivets or into deep recesses.
- Not recommended for use on low energy surfaces such as polypropylene. The user should determine suitability of substrate.
Durability:
- External weathering: 5 years - (unprinted - European conditions)