POLI-FLEX BLOCKOUT SOFT
Product Information
POLI-FLEX® BLOCKOUT SOFT is a Sublimation-resistant, multilayer polyurethane film with a high opacity and is soft to touch. Even high temperatures will not cause any sublimation inks to bleed through the garment. POLI-FLEX® BLOCKOUT SOFT excels due to an excellent opacity.
POLI-FLEX® BLOCKOUT SOFT can be used for lettering on T-shirts, sport & leisure wear, sport bags and promotional articles. We recommend using a standard 45° knife. We recommend minimum time to be taken between plotting and further processing. After weeding the cut flex film is transferred by heat press. The PET liner should be removed warm.
BLOCKOUT OR TURBO®?
A simple test to make the right decision: Press a clear polyester film (e.g. liner leftovers of your flex film) on your sublimated fabric for 15 seconds at 160 °C. Lay the polyester on a white substrate.
For high discoloration use BLOCKOUT SOFT. For only slight discoloration use TURBO®.
BLOCKOUT films are slightly thicker at 125 μm and less stretchable than TURBO® films. This is valid for both POLI-FLEX® and TURBO®-PRINT ranges.
Do not pre-heat dye sublimated garment before pressing.
- 125 micron
- Self-adhesive PET liner
- Warm peel
- Standard 45° blade
- OEKO-TEX® Standard 100 Class 1
*Colours are a guide only.
*500mm wide
*Sold by the metre.
We deliver all over Australia!
Check our FAQ's for lead times.
Talk to an expert. We're on hand to help with any of your questions 8am-5pm,
Monday to Friday.
Call our team on 1300 713 567.
| Available widths | 500mm |
|---|---|
| Finishes | Matt |
| Adheres to | Cotton, Polyester, Poly/cotton blends, 100% Polyester |
| Heat Application | 130 Degrees, 5 Seconds, Peel warm |
| Specification | 120 Micron, Adhesive polyester carrier, Blade: 45 deg |
| Washing | Wait 24hrs before washing, Up to 60 degree washability - inside-out, No bleach or aggressive chemicals |