METAMARK MD5 HIGH TACK B/OUT PACKS
Product Information
Metamark MD5 High Tack Blockout is a 70 micron, white gloss digitally printable film. Developed for applications to difficult to stick to surfaces like, smooth low energy plastics (PE and PP) as well as for interior wall decor applications (For use on smooth, sealed interior walls). MD5-H B/O has the MD5 face film with a high bond adhesive for assurance, combined with outstanding print performance to make your designs pop.
- White Gloss
- 70 micron
- Polymeric Calendered Vinyl
- High tack permanent grey solvent-based acrylic adhesive
- Not suitable for application over rivets or complex recesses.
- Suitable for wet or dry application
- Suitable for use on Solvent, Eco Solvent, Latex and UV inkjet printers
- Overlaminating is recommended - matched to Metaguard MG700 series
- External weathering 7 years (Unprinted)
- Fire Rating Class B - BS EN 13501-1:2018
- REACH and RoHS Compliant
Prices exclude GST.
We deliver all over Australia!
Check our FAQ's for lead times.
Talk to an expert. We're on hand to help with any of your questions 8am-5pm,
Monday to Friday.
Call our team on 1300 713 567.
Adhesive Type:
- High tack permanent grey solvent-based acrylic
Release Liner Print:
- ‘Metamark Digital Vinyl’ grey print
- Weight 140 gsm nominal
- Type Layflat kraft paper with PE coating
Printing and Handling:
- Solvent, Eco Solvent, Latex and U.V. inkjet printers
- Ensure that the correct profiles & heater settings are used. Most profiles are available for download from www.metamark.co.uk
- Ensure material has reached room temperature & a relative humidity of 50% before printing
- Do not handle the face film directly, ensure it is free from dust and static
- Overlamination is recommended to prevent abrasion, extends colour fastness, and also offers easier handling
Overlaminating:
- Overlamination is recommended to prevent abrasion and to extend colour fastness.
- Allow the inks to cure before overlaminating, this is usually 24-48 hours. (Not applicable to HP Latex prints)
- • The matched laminate for MD5HB is MetaGuard MG-700 Series. For all other laminates the user should determine suitability.
Application:
- Allow a minimum of 24-48 hours for the solvents to dry off before application of the overlaminate, or to the substrate, depending on the print and drying conditions this can often be in excess of 48 hours. Retained solvents will reduce adhesion levels.
- Apply unstressed, in particular to curves and recesses.
- Not suitable for application over rivets or complex recesses.
- Suitable for wet application.
- The user should determine suitability of substrate.
Durability:
- 7 years (Unprinted)