Can't make up your mind?

You can now select up to 4 products to do a product comparison. Do a comparison now

Go to product comparison

METAMARK MDPH BLOCKOUT HIGH TACK

main product photo

Product Information

Metamark MDP High Tack Blockout is a 100 micron, monomeric calandered PVC vinyl. The high tack adhesive solves the problem of adhesion onto smooth low energy surfaces like Polypropylene, as well as being a durable graphic onto extreme sports equipment. The grey pigment solvent based adhesive provides increased opacity. being 100 micron makes this an ideal solution for labels.

Features:

  • 100 micron
  • White Gloss
  • Monomeric Calendered Viny
  • Grey solvent based High Tack adhesive
  • Printable with Solvent, Eco Solvent, Latex and UV inkjet printers
  • External weathering 4 years (Unprinted)
  • Fire Rating Class B - BS EN 13501-1:2018
  • REACH and RoHS Compliant

More information in the FAQ tab below.

Starting at $492.84
Prices exclude GST.
Add to Product Comparison Add to Wishlist

We deliver all over Australia! 
Check our FAQ's for lead times.

Customer Service

Talk to an expert. We're on hand to help with any of your questions 8am-5pm,
Monday to Friday.
Call our team on 1300 713 567.

You're enquiring:METAMARK MDPH BLOCKOUT HIGH TACK
Please type the letters and numbers below

Adhesive Type:

  • High-tack perm. Grey Solvent-based acrylic
Release Liner:
  • Weight 140 gsm nominal 
  • Type Layflat kraft paper with PE coating

Printing and Handling:

  • Solvent, Eco Solvent, Latex and U.V. inkjet printers
  • Ensure that the correct profiles & heater settings are used. Most profiles are available for download from www.metamark.co.uk
  • Ensure material has reached room temperature & a relative humidity of 50% before printing
  • Do not handle the face film directly, ensure it is free from dust and static
Overlaminating:
  • Overlamination is recommended to prevent abrasion and to extend colour fastness.
  • Allow the inks to cure before overlaminating, this is usually 24-48 hours.
  • The matched laminate for MDP-H is MetaGuard 305 or 302. For all other laminates the user should determine suitability.

Application:

  • Allow the inks to cure before cutting or overlaminating, usually 24-48 hours. Perform cut path as separate operation to avoid edge curl
  • Not recommended for heavily textured surfaces. The user should determine suitability of substrate
  • Metamark MDP-H is matched to Metamark MetaGuard 300 overlaminate to ensure consistent results.
  • Refer to Metamark's Print and Cut Application Advice

Durability:

  • 4 years - (unprinted - European conditions)