METAMARK MD5A METASCAPE B/O WHITE
Product Information
Metamark MD5BA is a Gloss White blockout digital film with MetaScape technology. The MetaScape technology offers trouble-free application by providing easy removal of bubble and creases. A high level of performance for medium to long term indoor, outdoor and general signage applications. MD5BA has a grey blockout adhesive to provide increased opacity and preventing the substrate colour showing through. Can be used on most flat or simple curved surfaces. Matching overlaminate is the MG700 range giving extra UV protection. Available in packs with overlaminate.
Features:
- 70 micron - White Gloss - Blockout
- Permanent grey solvent-based acrylic adhesive
- MetaScape adhesive system
- Printable with Solvent, Eco Solvent, Latex and U.V. inkjet printers
- Outstanding print performance
- Applications to flat or slightly curved surfaces
- Suitable for wet application
- Up to 5 year durability
More information in the FAQ tab below.
We deliver all over Australia!
Check our FAQ's for lead times.
Talk to an expert. We're on hand to help with any of your questions 8am-5pm,
Monday to Friday.
Call our team on 1300 713 567.
Adhesive:
- ‘MetaScape’ permanent grey solventbased acrylic with air channels.
- Face Film Polymeric calendered PVC
- Gauge 70 micron nominal
- Tensile Strength 47N/25mm MD / 43N/25mm TD nom.
Printing and Handling:
- Suitable for use on Solvent, Eco Solvent, Latex and U.V. inkjet printers. Always perform a test print first.
- Ensure that the correct profiles and heater settings are used. Most profiles are available for download from www.metamark.co.uk.
- Ensure that the material has reached room temperature and a relative humidity of 50% before printing. Do not handle the face film directly and ensure it is free from dust and static.
Application:
- Allow the inks to cure before cutting flush to the print. This is usually 24-48 hours. (Not applicable to HP Latex prints)
- Apply unstressed, in particular to curves and recesses. It is not suitable for application over rivets or complex recesses.
- Suitable for dry application only.
- Not recommended for use on low energy surfaces such as polypropylene. The user should determine suitability of substrate.
Overlaminating:
- Overlamination is recommended to prevent abrasion and to extend colour fastness.
- Allow the inks to cure before overlaminating, this is usually 24-48 hours. (Not applicable to HP Latex prints)
- The matched laminate for MD5A-B is MetaGuard 700. For all other laminates the user should determine suitability
Durability:
- External weathering: 7 years - (unprinted - European conditions)